A. How to Replace Bandsaw Tires? 1. Unplug the bandsaw, release the blade tension and remove the blade, then remove the bandsaw wheel. 2. After removing the bandsaw wheel, thoroughly clean or cut off the old tire and any remaining traces. 3. Slide a portion of the tire onto the rim, then insert a short rod or tube between the tire and the wheel. Roll the tube around the rim once to evenly distribute the elasticity of the tire. 4. Squeeze a small amount of glue onto a brush and apply it to the surfaces of the tire and the wheel. Roll around the rim and repeat the application until the entire area is covered. Let the glue dry for 24 hours before using the bandsaw again. B. Specification Parameters - **Diameter**: Suitable for 12 - inch (305 mm) bandsaw wheels. - **Applicable Models**: Suitable for bandsaws of brands such as LB1200F, Charnwood W721, Craftsman, Jet, and Grizzly that use 2240 - mm bandsaw blades. - **Color**: Black. - **Material**: Rubber. - **Dimensions**: Approximately 20 mm wide x 3 mm thick. - **Package Contents**: 2 rubber bandsaw tires. C. Precautions The package only includes the above - mentioned contents and does not include other products. Please note that light and different displays may cause slight color differences between the items in the picture and the actual products. A measurement error of +/- 1 - 3 cm is allowed.