Feature: 1. Relatively common national standard connector double ferrule straight‑through connector, acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance. 2. Suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion. 3. Compression ferrule connector is composed of three parts: the connector body, the ferrule and the nut. 4. When the ferrule and the nut are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing. 5. Ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble. Break the traditional installation method Specification: Item Type: Compression Ferrule Connector Material: 316 Stainless steel Scope of Application: Oil refining, chemical industry, natural gas, food manufacturing, biomedicine, instrumentation, semiconductor, accurate instrumentation, hydraulic pipeline, chemical industry, automotive industry, electronic products, accurate machinery, solar energy, petroleum exploration, ship manufacturing, etc. Formula Pressure: 0.IMPA-15MPA Applicable Temperature: ≤450℃ Connection Mode: Double ferrule connection Piping: Ф3~Ф25.4 ordinary accurate seamless pipe Applicable Medium: Oil, water, and other non-corrosive or corrosive medium Thread specification(british system) Commonly names Other names Male thread size(approx.) Female thread size(approx.) Error(approx.) 1/8 1 point DN6 9.5mm / 0.4in 8.8mm / 0.3in 0.3mm / 0.01in 1/4 2 point DN8 12.5mm / 0.5in 11.5mm / 0.5in 0.3mm / 0.01in 3/8 3 point DN10 16.2mm / 0.6in 15.3mm / 0.6in 0.3mm / 0.01in 1/2 4 point DN15 20.3mm / 0.8in 19.5mm / 0.8in 0.3mm / 0.01in . Package List: 1 x Compression Ferrule Connector