Working Voltage: AC/DC 12V-36V (supports both AC and DC input, wide voltage range from 12V to 36V including 12V, 14V, 16V, 18V, 24V, 28V, 36V) Working Current: 48mA Quiescent Current: 16mA Max Load: 10A Relay (optimal performance under 5A / 60W) Color: White Material: ABS Function: Receiver with manual button control and wired external button (transmitter not included) Wiring: Connect Normally Open terminal to the external button pin (U--S--D--GND) to control motor forward and reverse cycle Default State: OFF (if power is interrupted and restored, the unit remains OFF until manually turned ON) Output Mode: Momentary or Latched, selectable via jumper on receiver Ships default in Latched mode; to change to Momentary, adjust the jumper (do not use Toggle mode) Momentary Mode: Jumper set on "1&2" Latched Mode: Jumper set on "3&4" Operation: - Momentary: Press "Up" button for motor forward, release to stop. Press "Down" button for motor reverse, release to stop. - Latched: Press "Up" button for motor forward, press "Stop" to halt. Press "Down" button for motor reverse, press "Stop" to halt. Limit Switch: If not using a limit switch, UP, DOWN, and COM are pre-connected before shipping. Disconnect only if needed. Delay Protection: When in Latched mode, a 0.5-second delay is set between forward and reverse operations for protection. Package Includes: 1 x Wireless Remote Receiver (2 CR2016 button batteries not included) 1 x Receiving Controller Note: Light reflection and differences in display settings may cause slight variations in color between the image and actual product. Measurement error allowance is +/- 1-3cm.