Can be widely used to detect NPN and transistors, capacitors, resistors, diodes, transistors, N-channel and P-channel MOSFETs, IGBTs, JFETs, thyristors, batteries, etc. Zener diodes can also be detected and have a functional self-calibration.After the detection is completed, point the infrared remote control at the "IR" light, and then press the button on the remote control. If the detector decodes successfully, the data code and infrared waveform will be displayed.One-key operation, automatic detection and shutdown, you can also press the multi-function button to turn off the detector.Place the pins of the components in the corresponding area, turn the small handle, the detector will automatically detect, and the final will be clearly displayed on the backlit TFT screen.Instead of the usual display, this detector will display the results in color.Power Mode: Rechargeable Lithium BatteryDisplay: 3.5 x 3cm TFT screenDiode Range: Less than 4.5VZener diode: transistor detection area: 0.01-4.5V Zener diode detection area: 0.01-30VTriac Range: Less than 6mACapacitance: 25pF- 100mFResistance: 0.01-50MInductance: 0.01mH-20HBattery: 0.1-4.5VProduct chip: : ELECTRICALAC Voltage: multimeterDisplay Type: Digital display: 3.7VAC Current: MOSFETDC Current: ESROperating Mode: HandheldModel Number: LCR-TC1Dimensions: 70 x 90 x 28MMOperating Temperature: 0 - 40 color:Photo colorMaterial:plasticPackage Contents:1 x TFT Transistor Tester1 x Electronic components set1 x USB Cable3 x Test hookOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.