TFT LCD Screen for Galaxy J6, On6, J600FDS, J600GDS with Digitizer Full Assembly About the product 1. Replacement LCD Screen + Touch Screen Digitizer Assembly (TFT Material) for Galaxy J6 (2018) 2. Replace your broken or unusable screen with a new one 3. Restore your device to a like-new appearance 4. Designed for precise fit and full functionality 5. Each unit is tested and confirmed in good condition before shipment 6. Professional installation is highly recommended. No responsibility will be accepted after installation Before Installation Notes Tip 1: Test before installation When testing, do not remove any protective films or labels. Be aware of static electricity. Before starting any repair, ensure you are grounded using an ESD (electrostatic discharge) strap to prevent damage to internal components. Wear eye protection and handle glass components carefully to avoid injury from sharp edges. Tip 2: Simulate testing Screen replacements are fragile. Testing before full installation is strongly advised. Partially disassemble the phone, connect the motherboard to the new LCD/screen assembly via the display cable, power on the device, and complete testing. If the screen functions properly, proceed with full installation. If there is no display, contact support immediately. Do not force installation if issues are present. No responsibility will be taken after installation. Tip 3: Avoid cable over-bending Do not bend the LCD cable beyond 90 degrees. Excessive bending may result in a black screen or permanent damage.