Specification: _x005f_x000D_ Origin: Mainland China _x005f_x000D_ Material: Aluminum alloy _x005f_x000D_ Main controller: RTL9210B _x005f_x000D_ Maximum support: 2TB _x005f_x000D_ Interface: USB 3.1 Gen2 _x005f_x000D_ NVME read/write: 10Gbps _x005f_x000D_ Sata read and write: 5Gbps _x005f_x000D_ Fan speed: 7000 rpm _x005f_x000D_ Noise: 30dB _x005f_x000D_ Hard disk interface: M2 B&M Key, M Key _x005f_x000D_ Applicable protocol: Dual protocol compatible with NVME PCI-E protocol and SATA NGFF protocol _x005f_x000D_ Hard disk support: M.2 NGFF&NVME dual protocol, 2230/2242/2260/2280 and other four sizes of solid-state hard disk _x005f_x000D_ Output connector: USB3.1Type-C _x005f_x000D_ Installation method: Fixed with lock screws _x005f_x000D_ Support systems: for Windows, for Linux, for Android, for MAC _x005f_x000D_ Net weight of product: 66g _x005f_x000D_ Gross weight of product: 121g _x005f_x000D_ Product size: About 105.5x28x17.5mm/4.15x1.10x0.68inch _x005f_x000D_ Package size: About 170x75x20mm/6.69x2.95x0.78inch _x005f_x000D_ Matters needing attention: _x005f_x000D_ Equipped with a USB3.1 high-performance chip, the transmission speed of the product's input terminal is 10Gbps, and the transmission speed of devices connected to the USB3.0 interface will be affected _x005f_x000D_ This product uses standard USB 5V ± 5% power supply, exceeding the standard voltage range can cause product damage or safety hazards _x005f_x000D_ When removing a hard disk, please perform a safe removal operation on the computer before disconnecting from the computer. Do not forcibly remove the hard disk case and hard disk to avoid causing data or disk errors, damage, or loss _x005f_x000D_ Do not forcibly unplug the hard disk when copying data to avoid file loss or hard disk damage _x005f_x000D_ Before operating the hard disk partition or formatting, please backup the hard disk data in advance. Our company is not responsible for recovering the data in the hard disk, nor is it responsible for any losses caused by the loss of hard disk data _x005f_x000D_ Do not drop, squeeze, impact, or throw this product to avoid damaging it _x005f_x000D_ Reminder: _x005f_x000D_ 1. Excluding M.2 SSDs. _x005f_x000D_ 2.For new unused SSDs, it is necessary to create a partition first, otherwise they cannot be identified. _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ Note: _x005f_x000D_ Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! _x005f_x000D_ Please allow 1-2cm measuring deviation due to manual measurement. _x005f_x000D_ _x005f_x000D_ _x005f_x000D_ Included: _x005f_x000D_ 1 x Hard disk case _x005f_x000D_ 1 x USB A to C cable _x005f_x000D_ 1 x USB C to C cable _x005f_x000D_ 1 x Screwdriver 1. Hard Disk Case: M.2 SATA NVME to USB 3.1 hard disk housing. Comply with SATA 3 specifications and USB3.0 specifications. 2. Support: Dual protocol supports NGFF NVME protocol, suitable for M2 (M Key/B+M Key) SSDs, and supports M.2 SSDs, 22 * 30mm, 22 * 42mm, 22 * 60mm, and 22 * 80mm solid-state drives (SSD hard drives are not included) 3. Multifunctional: Optional with dual wire, USB-A, and USB-C interfaces. The output speed depends on the type of SSD you are using, NVME (10Gbps). Support UASP protocol. 4. Material: Aluminum alloy housing, with a colorful breathing cooling fan, efficient heat dissipation, easy to use, plug and play, no drive required.