Item Type: Stepper Motor DriverMaterial: Aluminum alloyCooling Method: Natural cooling or additional radiatorUse Environment: Use Occasion: Try to avoid dust, oil mist and corrosive gasTemperature: 0-50Humidity: 40-90%RHVibration: 10-55Hz/0.15mmStorage Temperature: -20-+65Weight. Approx 300g / 10.6oz Parameter Minimum value Typical Value Maximum Value Unit Continuous output current 1 5.6 A Input supply voltage 18 24 80VDC VAC Logic input current 7 10 20 mA Total power 120 W Pulse frequency 0 200 kHz Insulation resistance 500 M Digital output port logic current 100 mA Digital output port withstand voltage 24 V .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; } 1STABLE PERFORMANCE: The driver adopts 32 bit ARM chip with built in smoothing filtering function, so the external input can operate normally even without acceleration and deceleration. 2COST SAVING: The drive has a built in microcontroller and point action mode, which can replace the PLC on most occasion and significantly reduce user costs. 3SAFE USE: The driver is protected by over current, over voltage, over speed, over heat and tracking error, etc., which is safe to use. 4SETTABLE CURRENT: The drive uses advanced vector current, speed and position closed loop control algorithms, and the current can be set at will. 5HIGH RESPONSE FREQUENCY: The driver is an optocoupler isolated differential signal input, and the pulse response frequency can be up to 200KHZ, which can be set at any subdivision.