Compliant with Serial ATA specification, compliant With Serial ATA 1.0 specification, compatible With Ultra ATA 100/133Data transfer rate up to 1.5 Gbps (150 MB/s), support IDE drive size larger than 240GBSupport for Windows 98/98SE/ ME/ 2000/ XP/Win7/Win10, for OS 8.6 and aboveSupport the Serial ATA transfer rate of 1.5Gb/s (150MB/s)No driver is needed, the mini board size, no space wastedSpecifications:Item Name: IDE to SATA/SATA to IDE AdapterInterface: 40pin IDE /SATA/4PinConnection :The conversion card's IDE jack, plugged into the motherboard IDE interface;SATA data cable (delivery) one end plugged into the conversion card, the other end connected to the SATA hard disk;The conversion card is connected to the cable (delivery), the other end of the cable is connected to the chassis cable;SATA hard drive conversion line, then the chassis supply, so that the connection is good, you can start the computer .If the installation is still not recognized SATA hard disk, you should check in detail the above installation steps and connections, and note the following:This conversion card is inserted in the motherboard IDE interface, the motherboard IDE is not the space with the card IDE prominent position on the.Due to the conversion card's IDE interface is slightly smaller than the hard-line interface, so pay attention to whether the motherboard IDE's target should be plugged in, may be staggered in a row.Check the BIOS is set to automatically identify the hard disk device IDE interface, if not set to enter the BIOS settings.Material: plasticcolour: redPackage Contents:1 x IDE to SATA converter1 x SATA Cable(Note: Random color, don't accept the specified color.)1 x converter cableOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.